We all know that in China the standard classification, titanium forgings standard involves the titanium alloy products, metal nondestructive inspection method, titanium alloy titanium ingot, titanium alloy, titanium forging, heavy metal, aviation and aerospace with metal type casting material, pipe fittings, valves, titanium alloy, titanium alloy, titanium plate, titanium belt, aviation and space flight with titanium metal materials, general component integration, the body and motion, light metals and their alloys, metal chemical performance test method, processing technology products, non-ferrous metals and their alloys, basic standard with general method.

The technical requirements of titanium alloy TC4 forgings are TC4 is the name of the domestic forgings, the national standard for GB/T16598-96.

In ASTM corresponding to GRF5, forgings standard is ASTM B 381.

In AMS, it corresponds to Ti6Al4V, and the forging standard is AMS 4928.

In the US military standard corresponding to TI-6AL-4V, forging standard for MIL-T-9047.

The specific technical requirements depend on whether the forgings are sold in China or abroad.

Titanium and titanium forging of titanium disk forgings belongs to special-shaped processing custom parts, its material is titanium alloy tc4, because titanium alloy has high strength, high hot strength, good resistance to corrosion, good low temperature performance, chemical activity, and small thermal elastic advantage so widely used in aviation, automobile motorcycle industry and heavy metal machine industry, etc.

Titanium forging method with ultrasonic flaw detection, detected by ultrasonic flaw detection can detect type titanium forgings segregation defects, inclusions, residual shrinkage cavity, holes, cracks, defects such as overheating, in order to ensure the quality of the titanium alloy forgings, in addition to strictly control the raw material quality, must also be to prevent the occurrence of defects in the subsequent hot working process, should value the blank of forgings and semi-finished products of ultrasonic flaw detection, and final stage of X ray flaw detection and fluorescence penetrant flaw detection and anodized corrosion inspection means, such as the selection of the method in principle with general forgings are basically the same.

With the promotion, the application of titanium alloy are increasingly important bearing pieces replace steel (such as the United States has adopted in civil aviation on the weighing more than a ton of large titanium alloy forgings for aircraft structure), its metallurgical quality requirements will be more and more high, especially the use of ultrasonic testing technology to control the metallurgical quality of titanium alloy forgings, as well as the ultrasonic response relationship between titanium alloy microstructure, mechanical properties of the three aspects of research and a lot of work to do.

Baoji Pengyuan Nonferrous Metal Co., Ltd. has formed a titanium industry chain integrating sponge titanium production, vacuum smelting, forging and pressing, precision processing, plate, rod, wire, pipe, pressure vessel equipment manufacturing. Specific products are as follows: titanium and titanium alloy ingot, titanium and titanium alloy rods, titanium and titanium alloy tube, titanium and titanium alloy plate, composite plate, titanium alloy pipe plate, titanium alloy wire, special-shaped titanium alloy forgings,titanium alloy, titanium alloy,titanium rings of gold, titanium and titanium alloy roll collar, titanium alloy elbow, titanium shell and tube heat exchanger, titanium steel composite reaction kettle, titanium steel composite anode tank, high titanium salt water trough, titanium dechlorination tower light salt water tank, titanium pulp heater, separator, square plate titanium pipe, titanium discs, water treatment with titanium anode,titanium chromium plating tank, pump such as heterosexual machined part.

The following titanium disk and titanium forgings are forged by Baoji Pengyuan Nonferrous Metal Co., Ltd according to the customer's customized requirements. The titanium disk and titanium forgings are processed by mechanical CNC on the surface. After about a week of material preparation, melting, piering, deoxidation, CNC mechanical finishing and cleaning, they are packaged and delivered. Finally complete the whole process according to the delivery time specified by the customer.